Mr. Roger Rosmus reports

GOLIATH DRILLS MORE VISIBLE GOLD AT SUREBET GOLDEN GATE FEEDER ZONE AND 13.65 METRES* OF HIGHLY MINERALIZED QUARTZ-SULPHIDE-RICH BRECCIA, GOLDEN TRIANGLE, B.C.

Goliath Resources Ltd. has drilled more visible gold within the Surebet Golden Gate feeder zone and has intercepted 13.65 metres* of highly mineralized quartz-sulphide-rich breccia from hole GD-23-137 at its 100-per-cent-controlled Golddigger property, Golden Triangle, British Columbia. This intercept is interpreted to be the Bonanza shear that remains open. Visible gold has been reported from a total of seven holes drilled to date within the Surebet Golden Gate feeder zone, inclusive of GD-22-49, GD-22-58, GD-23-111, GD-23-118, GD-23-126, GD-23-133 and GD-23-137.

Drill hole GD-23-137 highlights:

• Visible gold 0.5 millimetre in size was intercepted at 83.9 metres in a mineralized quartz-sulphide-rich breccia within the Surebet Golden Gate feeder zone.
• GD-23-137 collared from pad TS-3 intersected 13.65 metres* of highly mineralized quartz-sulphide-rich breccia interpreted to be the Bonanza shear containing significant pyrrhotite-sphalerite-pyrite from 43.0 and 56.65 metres (located 125 metres to the southeast of pad A, 2022 drill season). A second quartz-sulphide-rich breccia interval was intercepted between 79.80 to 83.9 metres. Within this interval, visible gold 0.5 mm in diameter was identified at a depth of 83.9 metres.
• This is the fifth hole drilled in the 2023 season from within the Surebet Golden Gate feeder zone to intercept visible gold and significant widths of highly mineralized quartz-sulphide-rich breccia.
• This is the seventh hole containing visible gold from within the Surebet Golden Gate feeder zone that include GD-22-49, GD-22-58 drilled in 2022; high-grade gold assays; and GD-23-111, GD-23-118, GD-23-126, GD-23-133, GD-23-137 drilled in 2023; assays pending.

Visible gold hole assays, Surebet Golden Gate feeder zone 2022:

• GD-22-58 had a 273 gold equivalent gram-metres value intersecting visible gold and 24.80 grams per tonne AuEq (22.03 g/t Au and 127.62 g/t silver) over 11.00 metres*, including 38.70 g/t AuEq (34.42 g/t Au and 197.45 g/t Ag) over 7.00 metres* and 44.47 g/t AuEq (39.60 g/t Au and 224.10 g/t Ag) over 6.07 metres* within the Surebet Golden Gate feeder zone from 2022.
• GD-22-49 had a 166 AuEq by gm value intersecting visible gold and 21.30 g/t AuEq (20.46 g/t Au and 40.06 g/t Ag) over 7.77 metres*, including 27.55 g/t AuEq (26.47 g/t Au and 51.55 g/t Ag) over 6.00 metres* within the Surebet Golden Gate feeder zone from 2022.

GD-23-137 (assays pending) collared from pad TS-3 intersected 13.65 metres of highly mineralized quartz-sulphide-breccia interpreted as the Bonanza shear containing significant pyrrhotite (up to 12 per cent), sphalerite (up to 10 per cent) and pyrite (up to 5 per cent) from 43.0 and 56.65 metres (located 125 metres to the southeast of pad A, 2022 drill season). A second quartz-sulphide-rich breccia interval was intercepted between 79.80 to 83.9 metres, where a 0.5 mm grain of visible gold was identified at 83.9-metre depth.

All the occurrences of visible gold to date have been identified within quartz-breccia and veins in contact with or in close proximity to sphalerite and/or galena mineralization. The occurrence of visible gold has previously been independently confirmed in 2022 by the Colorado School of Mines with whom the company is collaborating on a project aimed at determining the origin and evolution of the gold mineralizing fluids at Surebet.

Golddigger property

The Golddigger property is 100 per cent controlled covering an area of 59,089 hectares (146,012 acres) and is in the world-class geological setting of the Eskay rift within the Golden Triangle of British Columbia and within three kilometres of the Red Line that is host to multiple world-class deposits. The Surebet discovery is in an excellent location in close proximity to the communities of Alice Arm and Kitsault where there is permitted mill site on private property. It is situated on tide water with direct barge access to Prince Rupert (190 kilometres via the Observatory inlet/Portland inlet). The town of Kitsault is accessible by road (190 kilometres from Terrace, 300 kilometres from Prince Rupert) and has a barge landing, dock and infrastructure capable of housing at least 300 people, including high-tension power. Additional infrastructure in the area includes the Dolly Varden Silver Mine Road (only seven kilometres to the east of the Surebet discovery) with direct road access to Alice Arm barge landing (18 kilometres to the south of the Surebet discovery) and high-tension power (25 kilometres to the east of Surebet discovery). The city of Terrace (population 16,000) provides access to railway, major highways and airport with supplies (such as food, fuel and lumber), while the town of Prince Rupert (population 12,000) is located on the west coast and houses an international container seaport also with direct access to railway and an airport with supplies.

Qualified person

Rein Turna, PGeo, is the qualified person as defined by National Instrument 43-101, for Goliath Resource projects, and supervised the preparation of, and has reviewed and approved, the technical information in this release.

Other

Oriented HQ-diameter or NQ-diameter diamond drill core from the drill campaign is placed in core boxes by the drill crew contracted by the company. Core boxes are transported by helicopter to the staging area, and then transported by truck to the core shack. The core is then reoriented, metreage blocks are checked, metre marks are labelled, recovery and RQD measurements taken, and primary bedding and secondary structural features including veins, dikes, cleavage and shears are noted and measured. The core is then described and transcribed in MX Deposit. Drill holes were planned using Leapfrog Geo and QGISTM software and data from the 2017 to 2022 exploration campaigns. Drill core containing quartz breccia, stockwork, veining and/or sulphide(s), or notable alteration are sampled in lengths of 0.5 to 1.5 metres. Core samples are cut lengthwise in half, one-half remains in the box and the other half is inserted in a clean plastic bag with a sample tag. Standards, blanks and duplicates were added in the sample stream at a rate of 10 per cent.

Grab, channels, chip and talus samples were collected by foot with helicopter assistance. Prospective areas included, but were not limited to, proximity to MINFile locations, placer creek occurrences, regional soil anomalies and potential gossans based on high-resolution satellite imagery. The rock grab and chip samples were extracted using a rock hammer, or hammer and chisel to expose fresh surfaces and to liberate a sample of anywhere between 0.5 to 5.0 kilograms. All sample sites were flagged with biodegradable flagging tape and marked with the sample number. All sample sites were recorded using hand-held GPS units (accuracy three to 10 metres) and sample ID, easting, northing, elevation, type of sample (such as outcrop, subcrop, float, talus, chip and grab) and a description of the rock were recorded on all-weather paper. Samples were then inserted in a clean plastic bag with a sample tag for transport and shipping to the geochemistry lab. Quality assurance/quality control samples including blanks, standards, and duplicate samples were inserted regularly into the sample sequence at a rate of 10 per cent.

All samples are transported in rice bags sealed with numbered security tags. A transport company takes them from the core shack to the ALS labs facilities in North Vancouver. ALS is either certified to International Organization for Standardization 9001:2008 or accredited to ISO 17025:2005 in all of its locations. At ALS samples were processed, dried, crushed and pulverized before analysis using the ME-MS61 and Au-SCR21 methods. For the ME-MS61 method, a prepared sample is digested with perchloric, nitric, hydrofluoric and hydrochloric acids. The residue is topped up with dilute hydrochloric acid and analyzed by inductively coupled plasma atomic emission spectrometry. Overlimits were reanalyzed using the ME-OG62 and Ag-GRA21 methods (gravimetric finish). For Au-SCR21 a large volume of sample is needed (typically one to three kilograms). The sample is crushed and screened (usually to minus 106 microns) to separate coarse gold particles from fine material. After screening, two aliquots of the fine fraction are analyzed using the traditional fire assay method. The fine fraction is expected to be reasonably homogenous and well represented by the duplicate analyses. The entire coarse fraction is assayed to determine the contribution of the coarse gold.

The reader is cautioned that grab samples are spot samples which are typically, but not exclusively, constrained to mineralization. Grab samples are selective in nature and collected to determine the presence or absence of mineralization and are not intended to be representative of the material sampled.

About Goliath Resources Ltd.

Goliath Resources is an explorer of precious metals projects in the prolific Golden Triangle of northwestern British Columbia and Abitibi greenstone belt of Quebec. All of its projects are in world-class geological settings and geopolitical safe jurisdictions amenable to mining in Canada.

* Widths are reported in drill core lengths and the true widths are estimated to be 80 to 90 per cent and AuEq metal values are calculated using: Au $1,644.08 (U.S.) per ounce, Ag $19.23 (U.S.)/oz, Cu $3.47 (U.S.) per pound, lead $1,870.50 (U.S.) per ton and zinc $2,882.50 (U.S.)/ton on Oct. 28, 2022. There is potential for economic recovery of gold, silver, copper, lead and zinc from these occurrences based on other mining and exploration projects in the same Golden Triangle mining camp where Goliath's project is located such as the Homestake Ridge gold project "Auryn Resources Technical Report, Updated Mineral Resource Estimate and Preliminary Economic Assessment on the Homestake Ridge Gold Project," prepared by Minefill Services Inc. (Bothell, Wash.), dated May 29, 2020. Here, AuEq values were calculated using three-year running averages for metal price and included provisions for metallurgical recoveries, treatment charges, refining costs and transportation. Recoveries for gold were 85.5 per cent, silver at 74.6 per cent, copper at 74.6 per cent and lead at 45.3 per cent. It will be assumed that zinc can be recovered with the copper at the same recovery rate of 74.6 per cent. The quoted reference of metallurgical recoveries is not from Goliath's Golddigger project, Surebet zone mineralization, and there is no guarantee that such recoveries will ever be achieved, unless detailed metallurgical work such as in a feasibility study can be eventually completed on the Golddigger project.

We seek Safe Harbor.