Stock Symbol: AEM (NYSE and TSX)
TORONTO, July 30, 2014 /PRNewswire/ - Agnico Eagle Mines Limited (NYSE:AEM, TSX:AEM) ("Agnico Eagle" or the "Company") is pleased to provide an update on
its 2014 exploration activities. Highlights include:
- Expansion of IVR discovery in Nunavut - Exploration drilling has expanded the scope of the mineralization at
the IVR property, located 50 kilometres northwest of the Meadowbank
mine. A total of 48 drill holes (7,423 metres) have been completed
since the program began in 2013. The best intercepts to date include
26.1 grams per tonne ("g/t") gold (capped) over 4.8 metres, and 27.6
g/t gold (capped) over 3.0 metres estimated true width. A second phase
of drilling (anticipated 20,000 metres) has recently commenced.
- Recent drilling at Meliadine expected to further expand the resource
base - In the first half of 2014, 118 exploration and conversion drill holes
totaling 30,900 metres were completed. The exploration ramp has been
extended by 527 metres. Recent results are expected to expand gold
resources at the Pump, Wesmeg/Normeg and Wolf deposits. Meliadine has
the Company's largest and fastest-growing high-grade complement of
reserves plus resources. An updated technical study is expected in late
2014 or early 2015.
- Resource conversion drilling completed at Akasaba West - Year to date, 28 drill holes totaling 5,327 metres have been
completed. Significant results include 1.14 g/t gold and 0.56% copper
(capped) over 91 metres. A technical study is evaluating the economics
of mining the deposit (which is located less than 30 km from Goldex)
and milling the ore at Agnico Eagle's Abitibi processing facilities.
- Kittila drilling extends Suuri zone at depth - A drill holegrading 6.8 g/t gold (uncapped) over 6.4 metres estimated true width
indicates that the Suuri zone remains open at depth below 1,340
metres. Current reserves extend to approximately 1,100 metres depth.
This deeper mineralization will be considered in future expansion
studies.
"Although it is still early days, the new IVR discovery and the deep
drill hole at Kittila could represent exciting new developments for our
northern business platform" said Sean Boyd, President and Chief
Executive Officer. "We are highly encouraged by the results at both
projects, and we will be working hard to evaluate the upside potential
of these discoveries and determine what potential impact they may have
on our current operations", added Mr. Boyd.
IVR Project - 2014 Drilling Expands New Mineralized Zones
Exploration drilling in 2013 and 2014 on the IVR property, which is
located approximately 50 kilometres northwest of the Meadowbank mine in
Nunavut, has resulted in the discovery of a number of mineralized
zones.
The 408-square-kilometre IVR property is located within Inuit Owned Land
and 100% interest was acquired in April 2013 subject to a mineral
exploration agreement with Nunavut Tunngavik Inc. The Company ran a
program to evaluate the property's gold potential from July to October
2013 that included ground geophysics (Mag-EM), prospecting, mapping and
two campaigns of diamond drilling. Fourteen drill holes were completed
in 2013 and another 34 drill holes were drilled in the first half of
2014. These two campaigns represent a total of 7,423 metres of
drilling.
Agnico Eagle's work has revealed multiple northeast-trending structures
with gold-bearing sulphide-rich lenses of mineralization within
volcano-sedimentary rocks. Three mineralized corridors were recognized
over 400 metres of strike length in 2013. A first phase of shallow
drilling (to 100 metres depth) in 2014 has extended the known
mineralized corridors and added a fourth one to the south (see the I,
V, R and Whale Tail zones on the IVR project map below). Based on the
current information, all structures are open in all directions
including at depth.
[IVR Project]
The highest grade results to date at IVR are from two holes at the R
zone: IVR14-031 with 26.1 g/t gold over 4.8 metres at 89 metres depth,
and hole IVR14-028 with 27.6 g/t gold over 3.0 metres at 58 metres
depth. Along the same R zone structure to the southwest are two more
intersections: hole IVR13-004 with 6.2 g/t gold over 5.7 metres at 28
metres depth, and hole IVR13-008 with 6.6 g/t gold over 7.2 metres at
72 metres depth and 9.8 g/t gold over 3.5 metres at 92 metres depth.
On the separate Whale Tail structure to the southeast is hole IVR14-015
grading 10.5 g/t gold over 3.5 metres at 43 metres depth. Hole
IVR14-044 intersected the I zone structure to the north, grading 8.7
g/t gold over 5.8 metres at 15 metres below surface. Hole IVR14-039
includes an intercept in the V zone of 3.7 g/t gold over 7.4 metres at
23 metres depth. All intercepts reported for the IVR project show
capped grades over estimated true widths, based on a preliminary
geological interpretation.
Additional information about these and other drill intersections is
included in the table below, while the drill collars are located on the
IVR project map. The drill collar coordinates table can be found in the
Appendix section of this news release.
Results from IVR project exploration drilling in 2013 and 2014
Drill hole
|
Deposit
|
From
(metres)
|
To
(metres)
|
Depth of
midpoint
below
surface
(metres)
|
Estimated
true width
(metres)
|
Gold grade
(g/t)
(uncapped)
|
Gold grade
(g/t)
(capped)**
|
IVR13-004*
|
R zone
|
35.4
|
42.3
|
28
|
5.7
|
6.20
|
6.20
|
and
|
|
47.5
|
52.5
|
36
|
4.1
|
6.05
|
6.05
|
IVR13-008*
|
R zone
|
95.5
|
104.2
|
72
|
7.2
|
6.55
|
6.55
|
and
|
|
124.5
|
128.7
|
92
|
3.5
|
9.77
|
9.77
|
IVR14-015
|
Whale Tail
|
60.0
|
63.6
|
43
|
3.5
|
22.85
|
10.52
|
IVR14-017
|
Whale Tail
|
88.0
|
103.0
|
68
|
14.5
|
1.83
|
1.83
|
including
|
|
91.0
|
96.0
|
66
|
4.8
|
2.72
|
2.72
|
IVR14-028
|
R zone
|
74.9
|
78.2
|
58
|
3.0
|
34.36
|
27.62
|
IVR14-031
|
R zone
|
15.0
|
18.0
|
12
|
2.9
|
10.90
|
10.90
|
and
|
|
120.0
|
125.0
|
89
|
4.8
|
54.40
|
26.13
|
IVR14-037
|
R zone
|
96.2
|
108.5
|
77
|
10.8
|
2.81
|
2.81
|
including
|
|
101.5
|
104.7
|
77
|
2.8
|
5.83
|
5.83
|
IVR14-039
|
R zone
|
27.0
|
36.3
|
23
|
7.4
|
3.70
|
3.70
|
IVR14-044
|
I zone
|
17.0
|
23.0
|
15
|
5.8
|
8.70
|
8.70
|
* IVR13 denotes a hole drilled in 2013
** Holes at IVR use a capping factor of 60 g/t gold.
A second phase of drilling (approximately 20,000 metres) has recently
commenced. Further ground has been acquired through staking,
increasing the land position by another 6,279 hectares.
A recent airborne VTEMplus Time-Domain electromagnetic survey covering
approximately 10,000 hectares detected a strong
magnetic-electromagnetic anomaly stretching over at least 7 kilometres
including the current exploration drilling area. Prospecting and
sampling programs have been initiated over the entire area, focusing on
targets outlined by the geophysical survey. In the past week,
prospecting has defined a 600-metre-long glacial boulder field, 3.5
kilometres west of the mineralized zones where drilling is currently
taking place. The boulders, some of which show visible gold, could have
been sourced from the south, within the strong mag-EM anomaly. Drilling
is planned to investigate this new sector using a third drill rig.
Greyhound - An Early Stage Project, Close to Meadowbank Infrastructure
In June 2014, Agnico Eagle optioned a new property called Greyhound from
Aura Silver Resources Inc. (AUU:TSXV) straddling the road that connects
the Meadowbank mine in Nunavut with the community of Baker Lake, about
35 kilometres south of the mine. Under the terms of the option
agreement, Agnico Eagle can acquire an initial 51% interest by making
cash payments totaling C$250,000 and completing C$1.75 million in
exploration expenditures before May 31, 2017, with an option to
increase its interest to 70% by making additional cash payments
totaling C$250,000 and completing an additional C$5.0 million in
exploration expenditures.
The property is underlain by Archean supracrustal rocks of the Woodburn
Lake group. Previous exploration has outlined gold, silver and base
metal mineralization in an area known as Aura Lake. In July, a program
consisting of 1,000 metres of drilling commenced to test three
promising target areas on the property.
Meliadine - 2014 Drilling Converts and Extends Known Deposits
Underground development, exploration, technical studies and permitting
have continued in the second quarter of 2014 at the 100%-owned
Meliadine project near Rankin Inlet, Nunavut. The Meliadine project has
the Company's largest and fastest-growing high-grade complement of
reserves plus resources. Probable reserves total 2.8 million ounces of
gold (12.0 million tonnes at a grade of 7.4 g/t), while indicated
resources are 3.1 million ounces of gold (19.0 million tonnes at 5.1
g/t) and inferred resources are 2.7 million ounces of gold (11.7
million tonnes at 7.2 g/t). For additional information see the Detailed
Mineral Reserve and Resource Data in the Company's February 12, 2014
news release.
Development of the exploration ramp has continued, adding 301 metres
length in the second quarter of 2014, for a total of 527 metres of ramp
constructed in 2014 to a depth of 168 metres below surface. The
full-year budget is 1,440 metres of ramp development (to a depth of 225
metres below surface). Construction of the ventilation raise collar on
surface has been completed; excavation of the Level 135-to-Surface
ventilation raise using the Alimak has started, with 63 metres
completed in the quarter.
Three drill rigs have been active on the surface drill program, which
began in late February. To the end of June, the rigs completed 118
holes (30,900 metres) of conversion drilling (Wesmeg/Normeg and
Tiriganiaq zones) and exploration drilling (Pump, Discovery, Wolf
zones). The drilling program for this year is expected to be completed
by the end of July. These results will be incorporated into a new
mineral reserve and resource estimate, which will be used in the
updated technical report.
The conversion drilling has confirmed the grade and width of the
near-surface portion of the Wesmeg/Normeg deposits. Some of the best
recent intercepts are shown in the table below, including hole M14-2226
with 12.5 g/t gold (capped) over 5.3 metres (estimated true width) at
50 metres depth. Also refer to the Meliadine project geology map for
drill collar locations and the longitudinal section of the
Wesmeg/Normeg deposit.
[Meliadine Project - Geology Map]
[Meliadine Project - Wesmeg/Normeg Deposit - Composite Longitudinal
Section]
Results from Meliadine project Wesmeg/Normeg conversion drilling in 2014
Drill hole
|
Deposit
|
From
(metres)
|
To
(metres)
|
Depth of
midpoint
below
surface
(metres)
|
Estimated
true width
(metres)
|
Gold grade
(g/t)
(uncapped)
|
Gold grade
(g/t)
(capped)*
|
M14-2226
|
Wesmeg
|
65.3
|
70.7
|
50
|
5.3
|
12.51
|
12.51
|
M14-2249
|
Normeg
|
67.5
|
70.7
|
55
|
3.1
|
8.69
|
6.16
|
and
|
Normeg
|
197.8
|
204.8
|
154
|
7.0
|
7.70
|
7.70
|
M14-2269
|
Wesmeg
|
236.2
|
242.4
|
179
|
5.8
|
11.10
|
10.07
|
* Capping at Wesmeg and Normeg ranges from 15 g/t to 60 g/t gold.
Significant new gold mineralization was discovered in the Pump zone,
showing its potential to host additional high-grade resources,
including hole M14-2220 that yielded 19.8 g/t gold (capped) over 5.2
metres (estimated true width) at 12 metres depth. A resumption of
exploration at the Wolf deposit yielded positive results including an
11.0-metre-long intercept (estimated true width) grading 8.4 g/t gold
(capped) at 228 metres depth (hole M14-2292). The best intercepts from
these two deposits are shown in the table below. Also refer to the
Meliadine project geology map for drill collar locations and the
longitudinal sections of the Pump and Wolf deposits.
[Meliadine Project - Pump Deposit - Composite Longitudinal Section]
[Meliadine Project - Wolf Deposit - Composite Longitudinal Section]
Results from Meliadine project Pump and Wolf exploration drilling in
2014
Drill hole
|
Deposit
|
From
(metres)
|
To
(metres)
|
Depth of
midpoint
below
surface
(metres)
|
Estimated
true width
(metres)
|
Gold grade
(g/t)
(uncapped)
|
Gold grade
(g/t)
(capped)
|
M14-2220
|
Pump
|
11.1
|
17.0
|
12
|
5.2
|
22.39
|
19.77*
|
and
|
Pump
|
20.0
|
25.5
|
20
|
5.0
|
8.29
|
8.29
|
M14-2229
|
Pump
|
60.0
|
65.7
|
47
|
5.4
|
25.26
|
18.91**
|
M14-2244
|
Pump
|
476.9
|
480.0
|
427
|
3.1
|
11.51
|
11.51
|
M14-2268
|
Wolf
|
351.0
|
355.6
|
277
|
4.0
|
5.90
|
5.90
|
M14-2287
|
Wolf
|
215.5
|
220.4
|
174
|
4.2
|
6.12
|
6.12
|
M14-2292
|
Wolf
|
278.6
|
298.3
|
229
|
16.6
|
6.99
|
6.52***
|
including
|
Wolf
|
280.0
|
293.0
|
228
|
11.0
|
9.13
|
8.42***
|
M14-2305
|
Pump
|
314.8
|
318.9
|
270
|
3.9
|
9.50
|
9.50
|
* Capped at 30 g/t gold.
** Capped at 40 g/t gold.
*** Capped at 50 g/t gold.
The permitting team has delivered the Final Environmental Impact
Statement (FEIS), and the technical review is currently in progress.
Work continues on the updated technical report, with completion of the
study expected in late 2014 or early 2015.
Akasaba West - Could Provide Future Mill Feed to Agnico's Abitibi
Facilities
In January 2014, Agnico Eagle acquired the Akasaba West gold-copper
deposit from Alexandria Minerals (AZX:TSXV) for C$5.0 million and a 2%
NSR royalty on any gold production exceeding 210,000 ounces. Located
less than 30 kilometres from Agnico Eagle's Goldex mine in Val d'Or,
Quebec, the Akasaba West deposit could potentially create flexibility
and synergies for the Company's operations in the Abitibi region by
utilizing extra processing capacity at both the Goldex and LaRonde
mines, while improving the cost profile.
In the first half of 2014, a resource conversion drill program of 28
holes totaling 5,327 m was completed. Some of the better results
include hole 164-13-001 with 1.14 g/t gold and 0.56% copper over 91
metres at 98 metres depth, and hole 164-14-019 with 1.13 g/t gold and
0.66% copper over 78 metres at almost 200 metres depth (all grades are
capped; widths are estimated true widths). Additional information
about these and other drill intersections is included in the table
below, while the intercept pierce points are located on the Akasaba
West project longitudinal section. The drill collar coordinates table
can be found in the Appendix section of this news release.
[Akasaba West Project - Composite Longitudinal Section]
These results will be incorporated into a technical study that is
expected to be completed by year end 2014.
Results from Akasaba West project conversion drilling, January 1 to June
30, 2014
Drill hole
|
From
(metres)
|
To
(metres)
|
Depth of
midpoint
below
surface
(metres)
|
Estimated
true width
(metres)
|
Gold
grade
(g/t)
uncapped
|
Gold grade
(g/t)
capped*
|
Copper
grade (%)
uncapped
|
Copper
grade
(%)
capped**
|
164-13-001
|
74
|
180
|
98
|
91
|
1.14
|
1.14
|
0.56
|
0.56
|
164-14-009
|
21
|
78.8
|
36
|
45
|
1.27
|
1.27
|
0.63
|
0.63
|
164-14-014
|
82
|
187
|
107
|
70
|
0.84
|
0.84
|
0.50
|
0.50
|
164-14-017
|
45
|
129
|
61
|
66
|
1.41
|
1.41
|
0.59
|
0.59
|
164-14-019
|
213
|
311.5
|
198
|
78
|
1.13
|
1.13
|
0.66
|
0.66
|
164-14-022
|
166
|
262
|
157
|
81
|
0.84
|
0.84
|
0.48
|
0.48
|
* All Akasaba West gold grades are capped at 15 g/t gold.
** All Akasaba West copper grades are capped at 10% copper.
Kittila - Drilling Extends Suuri Mineralized Trend at Depth
Mine-site exploration drilling at Agnico Eagle's Kittila mine, located
in Finland, in the first half of 2014 has totalled 3,000 metres of a
total-year budget of 7,000 metres. The target is levels 1000 to 1500
where the Suuri Trend plunges northward beneath the Roura pit, below
the current reserves.
During the second quarter, hole ROD14-002C (drilled from the exploration
ramp) returned one of the deepest intersections to date, encountering
6.8 g/t gold (uncapped) over 6.4 metres (estimated true width)
including 12.0 g/t gold over 2.2 metres at 1,340 metres depth. This
intersection is approximately 250 metres below the bottom of the
current reserves, demonstrating a continuation of the Suuri
mineralization trend to depth. Additional information about this drill
intersection is included in the table below, while the intercept pierce
point is located on the Kittila Mine longitudinal section. The drill
collar coordinates table can be found in the Appendix section of this
news release.
[Kittila Mine - Composite Longitudinal Section]
The deep drilling program will be accelerated with the aim of completing
several additional holes before the end of 2014. The objective is to
increase the resource below the 1100m level. The two other deposits
(Roura and Rimpi) will be drilled from the ramp once access is
available next year. Roura and Rimpi are open at depth, and drilling
from the ramp is expected to further extend these zones.
Recent result from Kittila project deep exploration drilling
Drill hole
|
From
(metres)
|
To
(metres)
|
Depth of
midpoint
below
surface
(metres)
|
Estimated
true width
(metres)
|
Gold grade
(g/t)
uncapped*
|
ROU14-002C
|
684.6
|
697.5
|
1,343
|
6.4
|
6.81
|
including
|
684.6
|
689.0
|
1,340
|
2.2
|
12.01
|
* All grades are uncapped at Kittila.
About Agnico Eagle
Agnico Eagle is a senior Canadian gold mining company that has produced
precious metals since 1957. Its nine mines are located in Canada,
Finland and Mexico, with exploration and development activities in each
of these regions as well as in the United States. The Company and its
shareholders have full exposure to gold prices due to its long-standing
policy of no forward gold sales. Agnico Eagle has declared a cash
dividend every year since 1983.
Forward-Looking Statements
The information in this news release has been prepared as at July 30,
2014. Certain statements contained in this document constitute
"forward-looking statements" within the meaning of the United States
Private Securities Litigation Reform Act of 1995 and forward-looking
information under the provisions of Canadian provincial securities laws
and are referred to herein as forward-looking statements. When used in
this document, the words "anticipate", "expect", "estimate",
"forecast", "will", "planned", and similar expressions are intended to
identify forward-looking statements or information.
Such statements include without limitation: statements regarding timing
and amounts of capital expenditures and other assumptions; estimates of
future reserves, resources, mineral production, optimization efforts
and sales; estimates of reserves and resources, the estimated timing
for the completion of technical studies and reports, statements
regarding anticipated future exploration; and whether results thereof
will expand gold reserves or resources, the anticipated timing of
events with respect to the Company's mine sites, development projects
and exploration properties and the potential of the Akasaba West
deposit to create flexibility and synergies at the Company's
operations. Such forward-looking statements reflect the Company's views
as at the date of this document and are subject to certain risks,
uncertainties and assumptions, and undue reliance should not be placed
on such statements and information. Many factors, known and unknown
could cause the actual results to be materially different from those
expressed or implied by such forward-looking statements and
information. Such risks include, but are not limited to: the volatility
of prices of gold and other metals; uncertainty of mineral reserves,
mineral resources, mineral grades and mineral recovery estimates;
uncertainty of future production, capital expenditures, and other
costs; currency fluctuations; financing of additional capital
requirements; cost of exploration and development programs; mining
risks; community protests; risks associated with foreign operations;
governmental and environmental regulation; the volatility of the
Company's stock price; and risks associated with the Company's
byproduct metal derivative strategies. The material factors and
assumptions used in the preparation of the forward-looking statements
and information contained herein, which may prove to be incorrect,
include, but are not limited to, the assumptions set forth herein and
in management's discussion and analysis ("MD&A") and the Company's
Annual Information Form ("AIF") for the year ended December 31, 2013
filed with Canadian securities regulators and that are included in its
Annual Report on Form 40-F for the year ended December 31, 2013 ("Form
40-F") filed with the U.S. Securities and Exchange Commission (the
"SEC") as well as: that there are no significant disruptions affecting
operations; that production, permitting and expansion at each of Agnico
Eagle's properties proceeds on a basis consistent with current
expectations and plans; that the relevant metals prices, exchange rates
and prices for key mining and construction supplies will be consistent
with Agnico Eagle's expectations; that Agnico Eagle's current estimates
of mineral reserves, mineral resources, mineral grades and metal
recovery are accurate; that there are no material delays in the timing
for completion of ongoing growth projects; that the Company's current
plans to optimize production are successful; and that there are no
material variations in the current tax and regulatory environment.
For a more detailed discussion of such risks and other factors that may
affect the Company's ability to achieve the expectations set forth in
the forward-looking statements contained in this document, see the
Company's AIF, MD&A and Form 40-F, as well as the Company's other
filings with the Canadian securities regulators and the SEC. The
Company does not intend, and does not assume any obligation, to update
these forward-looking statements and information. For a detailed
breakdown of the Company's reserve and resource position see the
Company's Annual Information Form or Form 40-F.
Notes to Investors Regarding the Use of Resources
Cautionary Note to Investors Concerning Estimates of Measured and
Indicated Resources
This news release uses the terms "measured resources" and "indicated
resources". Investors are advised that while those terms are recognized
and required by Canadian regulations, the SEC does not recognize them.
Investors are cautioned not to assume that any part or all of mineral
deposits in these categories will ever be converted into reserves.
Cautionary Note to Investors Concerning Estimates of Inferred Resources
This news release also uses the term "inferred resources". Investors are
advised that while this term is recognized and required by Canadian
regulations, the SEC does not recognize it. "Inferred resources" have a
great amount of uncertainty as to their existence, and great
uncertainty as to their economic and legal feasibility. It cannot be
assumed that all or any part of an inferred mineral resource will ever
be upgraded to a higher category. Under Canadian rules, estimates of
inferred mineral resources may not form the basis of feasibility or
pre-feasibility studies, except in rare cases. Investors are cautioned
not to assume that part or all of an inferred resource exists, or is
economically or legally mineable.
Scientific and Technical Data
Cautionary Note To U.S. Investors - The SEC permits U.S. mining
companies, in their filings with the SEC, to disclose only those
mineral deposits that a company can economically and legally extract or
produce. Agnico Eagle Mines Limited reports mineral resource and
reserve estimates in accordance with the CIM guidelines for the
estimation, classification and reporting of resources and reserves in
accordance with the Canadian securities regulatory authorities' (the
"CSA") National Instrument 43-101 Standards of Disclosure for Mineral
Projects ("NI 43-101"). These standards are similar to those used by
the SEC's Industry Guide No. 7, as interpreted by Staff at the SEC
("Guide 7"). However, the definitions in NI 43-101 differ in certain
respects from those under Guide 7. Accordingly, mineral reserve
information contained herein may not be comparable to similar
information disclosed by U.S. companies. Under the requirements of the
SEC, mineralization may not be classified as a "reserve" unless the
determination has been made that the mineralization could be
economically and legally produced or extracted at the time the reserve
determination is made. A "final" or "bankable" feasibility study is
required to meet the requirements to designate reserves under Industry
Guide 7. Agnico Eagle uses certain terms in this news release, such as
"measured", "indicated", and "inferred", and "resources" that the SEC
guidelines strictly prohibit U.S. registered companies from including
in their filings with the SEC.
NI 43-101 requires mining companies to disclose reserves and resources
using the subcategories of "proven" reserves, "probable" reserves,
"measured" resources, "indicated" resources and "inferred" resources.
Mineral resources that are not mineral reserves do not have
demonstrated economic viability.
A mineral reserve is the economically mineable part of a measured and/or
indicated mineral resource. It includes diluting materials and
allowances for losses, which may occur when the material is mined or
extracted and is defined by studies at pre-feasibility or feasibility
level as appropriate that include application of modifying factors.
Such studies demonstrate that, at the time of reporting, extraction
could reasonably be justified.
Modifying factors are considerations used to convert mineral resources
to mineral reserves. These include, but are not restricted to, mining,
processing, metallurgical, infrastructure, economic, marketing, legal,
environmental, social and governmental factors.
A proven mineral reserve is the economically mineable part of a measured
mineral resource. A proven mineral reserve implies a high degree of
confidence in the modifying factors. A probable mineral reserve is the
economically mineable part of an indicated and, in some circumstances,
a measured mineral resource. The confidence in the modifying factors
applying to a probable mineral reserve is lower than that applying to a
proven mineral reserve.
A mineral resource is a concentration or occurrence of solid material of
economic interest in or on the Earth's crust in such form, grade or
quality and quantity that there are reasonable prospects for eventual
economic extraction. The location, quantity, grade or quality,
continuity and other geological characteristics of a mineral resource
are known, estimated or interpreted from specific geological evidence
and knowledge, including sampling.
A measured mineral resource is that part of a mineral resource for which
quantity, grade or quality, densities, shape and physical
characteristics are estimated with confidence sufficient to allow the
application of modifying factors to support detailed mine planning and
final evaluation of the economic viability of the deposit. Geological
evidence is derived from detailed and reliable exploration, sampling
and testing and is sufficient to confirm geological and grade or
quality continuity between points of observation. An indicated mineral
resource is that part of a mineral resource for which quantity, grade
or quality, densities, shape and physical characteristics are estimated
with sufficient confidence to allow the application of modifying
factors in sufficient detail to support mine planning and evaluation of
the economic viability of the deposit. Geological evidence is derived
from adequately detailed and reliable exploration, sampling and testing
and is sufficient to assume geological and grade or quality continuity
between points of observation. An inferred mineral resource is that
part of a mineral resource for which quantity and grade or quality are
estimated on the basis of limited geological evidence and sampling.
Geological evidence is sufficient to imply but not verify geological
and grade or quality continuity.
A feasibility study is a comprehensive technical and economic study of
the selected development option for a mineral project that includes
appropriately detailed assessments of applicable modifying factors
together with any other relevant operational factors and detailed
financial analysis that are necessary to demonstrate, at the time of
reporting, that extraction is reasonably justified (economically
mineable). The results of the study may reasonably serve as the basis
for a final decision by a proponent or financial institution to proceed
with, or finance, the development of the project. The confidence level
of the study will be higher than that of a Pre-Feasibility Study.
In prior periods, reserves for all properties were typically estimated
using historic three-year average metals prices and foreign exchange
rates in accordance with the SEC guidelines. These guidelines require
the use of prices that reflect current economic conditions at the time
of reserve determination, which the Staff of the SEC has interpreted to
mean historic three-year average prices. Given the current lower
commodity price environment, Agnico Eagle has decided to use price
assumptions that are below the three-year averages. The assumptions
used for the mineral reserves estimates at all mines and advanced
projects as of December 31, 2013 are $1,200 per ounce gold, $18.00 per
ounce silver, $0.82 per pound zinc, $3.00 per pound copper, $0.91 per
pound lead and C$/US$, US$/Euro and MXP/US$ exchange rates of 1.03,
1.32 and 12.75, respectively.
The mineral reserve figures presented herein are estimates, and no
assurance can be given that the anticipated tonnages and grades will be
achieved or that the anticipated level of recovery will be realized.
The mineral reserves presented in this disclosure are separate from and
not a portion of the mineral resources.
|
|
|
|
|
|
|
Property/Project name and location |
|
|
|
|
| Date of most recent Technical Report (NI 43-101) filed on SEDAR |
Kittila, Finland |
|
|
|
|
| March 4, 2010 |
Meadowbank, Nunavut, Canada |
|
|
|
|
| February 15, 2012 |
Meliadine, Nunavut, Canada |
|
|
|
|
| March 8, 2011 |
|
|
|
|
|
|
|
The effective date for all of the Company's mineral resource and reserve
estimates in this news release is December 31, 2013. Additional
information about each of the mineral projects that is required by NI
43-101, sections 3.2 and 3.3 and paragraphs 3.4 (a), (c) and (d) can be
found in the Technical Reports referred to above, which may be found at
www.sedar.com. Other important operating information can be found in the Company's
AIF and Form 40-F.
Guy Gosselin, Vice-President Exploration for Agnico Eagle Mines Limited,
approved the scientific and technical information in this news release.
Mr. Gosselin verified the data disclosed in this news release,
including the sampling, analytical and testing data underlying the
information. Verification included a review and validation of the
applicable assay databases and reviews of assay certificates. Mr.
Gosselin is a P.Eng. with the Ordre ingenieurs du Quebec, and is a
qualified person as defined by NI 43-101.
Appendix: Selected drill collar coordinates
IVR Project exploration drill collar coordinates
|
Drill collar coordinates*
|
Drill hole ID
|
UTM North
|
UTM East
|
Elevation
(metres
above sea
level)
|
Azimuth
|
Dip
(degrees)
|
Length
(metres)
|
IVR13-004
|
7255993
|
606653
|
160
|
315
|
-45
|
150
|
IVR13-008
|
7255950
|
606564
|
160
|
323
|
-45
|
180
|
IVR14-015
|
7255671
|
606976
|
160
|
323
|
-45
|
129
|
IVR14-017
|
7255408
|
606672
|
160
|
323
|
-45
|
159
|
IVR14-028
|
7256213
|
606857
|
160
|
323
|
-45
|
183
|
IVR14-031
|
7256243
|
606920
|
160
|
143
|
-47
|
147
|
IVR14-037
|
7256296
|
606972
|
160
|
323
|
-48
|
171
|
IVR14-039
|
7256344
|
606759
|
160
|
323
|
-47
|
128
|
IVR14-044
|
7256748
|
606909
|
160
|
323
|
-47
|
177
|
* Coordinate System UTM Nad 83 zone 14
Akasaba West Project exploration drill collar coordinates
|
Drill collar coordinates*
|
Drill hole ID
|
UTM North
|
UTM East
|
Elevation
(metres above
sea
level)
|
Azimuth
|
Dip (degrees)
|
Length
(metres)
|
164-13-001
|
5324221
|
307675
|
328
|
350
|
-51
|
201
|
164-14-009
|
5324295
|
307765
|
329
|
352
|
-50
|
126
|
164-14-014
|
5324222
|
307624
|
328
|
349
|
-55
|
249
|
164-14-017
|
5324268
|
307668
|
328
|
351
|
-47
|
166
|
164-14-019
|
5324129
|
307689
|
328
|
352
|
-54
|
360
|
164-14-022
|
5324161
|
307735
|
328
|
354
|
-51
|
318
|
* Coordinate System UTM Nad 83 zone 18
Kittila Mine deep exploration drill collar coordinates
|
Drill collar coordinates*
|
Drill hole ID
|
UTM North
|
UTM East
|
Elevation
(metres above
sea level)
|
Azimuth
|
Dip (degrees)
|
Length
(metres)
|
ROU14-002C
|
7535059
|
432600
|
-485
|
90
|
-61
|
715
|
* Coordinate System Finnish KKJ Zone 2
SOURCE Agnico Eagle Mines Limited