Mr. Ari Sussman reports
CONTINENTAL GOLD SAMPLES 9.6 G/T GOLD AND 47 G/T SILVER OVER 30 METRES TRUE WIDTH IN THE VETA SUR CROSS-CUT, BURITICA, COLOMBIA
Continental Gold Ltd. has released initial channel sampling results from both the main crosscut and drift accessing the Veta Sur vein system at the company's 100-per-cent-owned Buritica project in Antioquia, Colombia. Approximately 800 metres of total underground development accessing Veta Sur has been completed to date with development face dimensions averaging 3.5 metres by 3.5 metres. This underground development program has provided the company with its first-ever underground access into the Veta Sur deposit and is expected to be completed by the end of November, 2014.
Highlights:
- Initial results from systematic channel sampling of both the crosscut
and along vein 62 and vein 51 through the central Veta Sur system have
ratified the locations and orientation of several veins in the current
mineral resource model.
- Continuous channel sampling along the Veta Sur crosscut intersected 18
veins and intervening mineralized material including, from the 180th
metre of the crosscut, a broad high-grade zone comprising 30 metres (true horizontal width) at 9.6 grams per tonne gold and 47 grams per tonne silver.
This zone is significantly broader than the corresponding area of the current mineral resource model and the mine plan for the upcoming preliminary economic assessment, scheduled for release in the fourth quarter of 2014.
-
In order to examine the continuity of mineralization along and between
veins, approximately 117 metres of drifting along vein 62 and vein 51
has been completed to date. Systematic face sampling of this 3.5-by-3.5-metre drift, which mostly contains both veins, has outlined a laterally
continuous, very high-grade zone comprising 3.15 metres (true horizontal width) at 59.7 grams per tonne gold and 139 grams per tonne silver along 85 metres.
High-grade mineralization remains open to the northeast and southwest where it will be tested in further development.
- Mineralization is generally present at both the northwestern and
southeastern edges of sampled faces, suggesting that the true width of
the zone may be broader than 3.15 metres presently outlined. This zone
is significantly higher grade and broader than the current measured and
indicated grades of the veins along this 85-metre segment where vein 62
and vein 51, combined, average 2.1 metres at 27.3 grams per tonne gold and 134 grams per tonne
silver in the current mineral resource estimate prepared in accordance
with National Instrument 43-101.
- Mineralized structures between and with orientations differing from the
main veins are common in underground developments. These features can
lead to broadening of mineralized envelopes relative to the hard
boundary vein domains employed in the current mineral resource model,
which do not include such features. The additional mineralized
structures are concentrated in areas that are proximal to contact zones
between the andesitic intrusions, sediments and breccias.
- A series of short crosscuts, to the northwest and southeast from the
drift along vein 62 and vein 51, have commenced to assess the continuity
of the bulk zone of mineralization discovered in the main crosscut, as
well as mineralization on the margins of the vein 62 and vein 51 zone.
Short drifts from the main crosscut, to assess the lateral continuity
of other modelled veins, are also planned to commence shortly.
- A bulk sample of material blended from both the drift and the crosscut
will be processed through the pilot scale mill of the Yaragua mine for
mining reconciliation purposes. Results will be released once they have
all been received and compiled.
"Continental's first underground sampling in the Veta Sur system has demonstrated the continuity of high-grade mineralization over widths greater than anticipated from the current mineral resource model and in provisional mine planning. The Veta Sur experience complements that from the company's extensive development in the Yaragua system and is encouraging for potential mining at Buritica," commented Ari Sussman, chief executive officer of Continental.
Details
Continental's 100-per-cent-owned, 62,425-hectare project, Buritica, contains several known areas of high-grade gold and silver mineralization, of base metal carbonate-style (stage I) variably overprinted by texturally and chemically distinctive high-grade (stage II) mineralization. The two most extensively explored of these areas (the Yaragua and Veta Sur systems) are central to this land package. The Yaragua system has been drill-outlined along 1,100 metres of strike and 1,500 vertical metres and partially sampled in underground developments. The Veta Sur system has been drill-outlined along 1,000-plus metres of strike and 1,500 vertical metres. Both systems are characterized by multiple, steeply dipping veins and broader, more disseminated mineralization and both remain open at depth and along strike, at high grades. This release documents the results of sampling of the first underground developments in upper parts of central Veta Sur.
UNDERGROUND CHANNEL SAMPLING, VETA SUR
Average
Length(i) width Gold Silver Elevation
Segment (m) (m) (g/t) (g/t) (m)
Veta Sur crosscut 30.0 9.6 47 1,690
including 3.12 61.1 164
Vein 62 and vein 51 drift 85 3.15 59.7 139 1,690
including 4.0 681.7 304
and 2.9 105.4 302
(i) Channel samples are taken continuously along the walls of the underground
crosscut and across the face of the underground drift. Faces are nominally
spaced every three metres along the drift and face composites average six
length-weighted channel samples. Widths are true horizontal metres at a zero-
gram-per-tonne-gold cut-off grade.
Veta Sur crosscut
The main underground crosscut through the Veta Sur deposit is located at an elevation of 1,690 metres above sea level with approximately 255 metres completed to date. Eighteen veins have been observed in the crosscut and their locations and orientations accord well with corresponding areas outlined in the current mineral resource estimate prepared in accordance with National Instrument 43-101.
Narrow vein structures (veinlets), at different orientations to the northeast-southwest strike of the main veins in the current mineral resource model, have been observed in the crosscut (and in the vein 62 and vein 51 drift). These narrow structures are generally not included in mineral resource modelling. However, in certain locations, these structures tend to swarm, resulting in mineralized structures of up to five grams per tonne gold over reasonable widths situated between and contiguous with modelled veins, adding to the widths of mineralized envelopes around main veins. These locations are commonly in areas of intense fracturing, proximal to contact zones of the andesite intrusions with sediments and/or breccias.
Continuous channel sampling has been undertaken along both the east and west walls of the crosscut. Sampling from the 180th metre of the crosscut (the location of the first main vein intersected in the crosscut), has outlined a broad high-grade zone as follows: 30 metres (true horizontal width) at 9.6 grams per tonne gold and 47 grams per tonne silver.
This zone is significantly thicker than the corresponding area of the current mineral resource model and in the mine plan for the upcoming PEA, scheduled for release in the fourth quarter of 2014. Additional channel sampling results for the balance of the crosscut are outstanding.
The bulk mineralized zone remains open to the southwest and northeast where it will be further tested by crosscuts, commenced and planned, from the vein 62 and vein 51 drift. Short drifts from the main crosscut will examine the continuity of high-grade veins within the mineralized zones.
Vein 62 and vein 51 drift
The vein 62 and vein 51 drift commenced at the 200-metre mark of the Veta Sur crosscut, and northeast/southwest development of approximately 120 metres has been completed to date. This nominally 3.5-by-3.5-metre drift follows the path (in part) of both vein 62 and vein 51. Channel sampling across the development face every three metres has outlined a continuous zone of high-grade mineralization, averaging 3.15 metres (true horizontal width) at 59.7 grams per tonne gold and 139 grams per tonne silver
along 85 metres.
Mineralization is generally present at both the northwestern and southeastern edges of the sampled face, suggesting that the true width of the zone might extend past the 3.15 metres presently outlined. In addition, this zone is significantly higher grade than the current measured and indicated grades of the veins along this 85-metre-long segment of the current mineral resource model, wherein vein 62 and vein 51, combined, average 2.1 metres at 27.3 grams per tonne gold and 134 grams per tonne silver.
The vein 62 and vein 51 mineralized zone remains open to both the northeast and southwest with channel sampling continuing until the completion of the drift later this year. The crosscuts from the vein 62 and vein 51 drift will facilitate evaluation of mineralization on the margins of this zone.
A bulk sample of material blended from both the drift and the crosscut will be processed through the pilot scale mill at the Yaragua mine for mining reconciliation purposes. Results will be released once they are all received and compiled.
Technical information
Dr. Vic Wall, PhD, special adviser to the company and a qualified person for the purpose of National Instrument 43-101, has prepared or supervised the preparation of, or approved, as applicable, the technical information contained in this press release. Dr. Wall is a geologist with 35 years experience in the minerals mining, consulting, exploration and research industries. Following a career in Australian and North American academes, he held senior positions in a number of multinational major and junior minerals companies. A fellow of the Australian Institute of Geoscientists, Dr. Wall is principal of Vic Wall & Associates, a Brisbane-based consultancy that provides geoscientific services to mineral companies and government agencies, worldwide.
Channel samples are taken continuously along the walls of the underground crosscut and across the face of the underground drift. Faces are nominally spaced every three metres along the drift, and face composites average six length-weighted channel samples. Widths are true horizontal metres at zero-gram-per-tonne-gold cut-off grade. The company utilizes a rigorous, industry-standard quality assurance/quality control program. Rock samples are shipped to a sample preparation lab run by ALS Colombia Ltd. in Medellin, Colombia. Samples are then shipped for analysis to an ALS-certified assay laboratory in Lima, Peru. Blanks, duplicates and certified reference standards are inserted into the sample stream to monitor laboratory performance and a portion of the samples are periodically check assayed at ACME Analytical Laboratories in Vancouver and/or Inspectorate America Corp. in Reno, Nev. Crush rejects and pulps are returned and stored in a secured storage facility for future assay verification.
For additional technical information on the Buritica project, please refer to the company's technical report entitled "Independent Technical Report and Resource Estimate on the Buritica Gold Project 2013," dated June 25, 2014, with an effective date of Dec. 31, 2013, prepared by Andrew J. Vigar, BappScGeo, FAusIMM, MSEG, and Martin Recklies, BappSCGeo, MAIG, each of Mining Associates Pty. Ltd., available on SEDAR, on the OTCQX and on the company website.
We seek Safe Harbor.
© 2026 Canjex Publishing Ltd. All rights reserved.