05:40:16 EDT Tue 21 May 2024
Enter Symbol
or Name
USA
CA



Adriana Resources Inc
Symbol ADI
Shares Issued 157,554,238
Close 2013-10-29 C$ 0.19
Market Cap C$ 29,935,305
Recent Sedar Documents

Adriana releases Lac Otelnuk NI 43-101 mineral resource

2013-10-30 08:39 ET - News Release

Subject: Adriana Announces Completion of Mineral Resource Estimate Adriana Announces Completion of Mineral Resource Estimate
Marketwired
 
 
Adriana Resources Inc.
TSX VENTURE:ADI
Other Recent News | Printer Friendly Version

October 30, 2013
Adriana Announces Completion of Mineral Resource Estimate
TORONTO, ONTARIO--(Marketwired - Oct. 30, 2013) - Adriana Resources Inc. (TSX VENTURE:ADI) ("Adriana" or the "Company") is pleased to report the completion of a new National Instrument 43-101 Standards of Disclosure for Mineral Projects ("NI 43-101") Mineral Resource estimate ("the Estimate") using information from the historic and most recent drilling programs on its 40% owned Lac Otelnuk Project. Adriana owns 40% of Lac Otelnuk Mining Ltd. ("LOM") which is a joint venture company with WISCO International Resources Development & Investment Limited ("WISCO") which in turn holds the Lac Otelnuk Property in Nunavik, Quebec.

A significant diamond drilling effort was carried out at the Lac Otelnuk Project in 2012. The main goals of the program were to complete infill drilling in the north part of the defined Mineral Resource area (previously named North Zone) on a 600 m by 500 m grid to upgrade the resource categorization and to accurately define the limits of the Main Zone (previously named the South Zone) of the deposit by extending the up-dip mineralization to surface along the western margin of the mineralization. From May to mid-December 2012, 157 BQ delineation holes totaling 18,508 m were drilled to expand and upgrade the Mineral Resource. An additional 18 PQ holes totaling 1,957 m were also drilled to obtain a 33 tonne bulk sample for metallurgical testing. Since 2007, Adriana and Lac Otelnuk Mining Ltd. have drilled a total of 392 diamond drill holes totaling 50,802 m on the Lac Otelnuk property. The Estimate was completed by Watts, Griffis and McOuat Limited ("WGM"), Consulting Geologists and Engineers of Toronto, Canada. The results show that the Measured and Indicated Mineral Resources have increased to 20.64 billion tonnes, representing an increase of approximately 82% compared with the estimate of August 2012, based on a Davis Tube Weight Recovery ("DTWR") cutoff grade of 18%.

The Total Iron (Head Fe analysis), DTWR and Satmagan results (Head magnetic Fe) are shown in the table below:

CATEGORIZED MINERAL RESOURCE ESTIMATE FOR LAC OTELNUK PROJECT (CUTOFF OF 18% DTWR)


----------------------------------------------------------------------------
----------------------------------------------------------------------------
Resource                    Tonnes      TFe Head          DTWR   Magnetic Fe
Classification       (in billions)             %             %             %
----------------------------------------------------------------------------
----------------------------------------------------------------------------
Measured                     16.21          29.3          25.8          17.8
Indicated                     4.43          31.5          24.1          16.7
                    --------------------------------------------------------
Total M&I                    20.64          29.8          25.4          17.6
                                                                            
Inferred                      6.84          29.8          26.3          17.8
----------------------------------------------------------------------------
----------------------------------------------------------------------------
----------------------------------------------------------------------------
----------------------------------------------------------------------------
                                                                            
Notes:  1. Interpretation of the mineralized zones were created as 3D       
           wireframes/solids based on logged geology and a nominal 10% DTWR 
           when required.                                                   
        2. Mineral Resources were estimated using a block model with a block
           size of 50m x 50m x 5m.                                          
        3. No grade capping was done. Tonnages and grades reported above are
           undiluted.                                                       
        4. Assumed Fe concentrate price was US$110/dmt.                     
        5. Mineral Resources which are not Mineral Reserves do not have     
           demonstrated economic viability. There is no certainty that all  
           or any part of the Mineral Resource will be converted into       
           Mineral Reserves. The estimate of Mineral Resources may be       
           materially affected by environmental, permitting, legal, title,  
           socio-political, marketing, or other relevant issues;            
        6. The quantity and grade of reported Inferred Mineral Resources in 
           this estimation are uncertain in nature and there has been       
           insufficient exploration to define these Inferred Resources as an
           Indicated or Measured Mineral Resource and it is uncertain if    
           further exploration will result in upgrading them to an Indicated
           or Measured Mineral Resource category;                           
        7. The Mineral Resources were estimated using the Canadian Institute
           of Mining, Metallurgy and Petroleum (CIM) Standards for Mineral  
           Resources and Reserves, Definitions and Guidelines prepared by   
           the CIM Standing Committee on Reserve Definitions and adopted by 
           CIM Council December 11, 2005.
 
The Estimate was completed using an Inverse Distance to the power of one method. In general, Measured Mineral Resources are defined as blocks being within 400 m of a drillhole intercept, Indicated Mineral Resources are defined as blocks from 400 m to 600 m from a drillhole intercept and Inferred Mineral Resources are defined as blocks more than 600 m distance from a drillhole intercept and interpolated out to a maximum of approximately 1,000 m where the drilling is more sparse, predominantly in the deeper parts of the deposit. This categorization was used specifically in the Main Zone area of the deposit and directly to the north of this area where more infill drilling was completed during the most recent drilling program.

Mr. Michael W. Kociumbas, P.Geo., Vice-President of WGM, and Mr. Richard Risto, P.Geo., are independent Qualified Persons in accordance with NI 43-101. Mr. Kociumbas has reviewed and is responsible for the Mineral Resources presented in this news release. WGM has previously visited the site, collected independent core samples and reviewed the QA/QC data received to date. Mr. Risto has reviewed and approved the underlying sampling, analytical and test data used for the Estimate.

The Company has also completed, the geotechnical drilling and test pitting programs for the Tailings Management Facility, Process Plant, Air Strip and construction material borrow sources. In addition, the hydrogeological and rock mechanical holes for the design of open pit have been completed. An 80 tonne bulk sample was extracted and the pilot plant testing is in progress.

Allen J. Palmiere, President & CEO, said "We are very proud of the work our team has completed to date and with the progress we have made this year with SNC-Lavalin's expertise on our project. We will continue to move the project forward and look forward to an exciting year ahead."

ON BEHALF OF ADRIANA RESOURCES INC.

Allen J. Palmiere, President and CEO

Certain information regarding the Company, including the Company's plans to increase and upgrade mineral resources and management's assessment of future plans and operations, may constitute forward-looking statements under applicable securities laws and necessarily involve known and unknown risks and uncertainties. Without limitation, statements relating to potential mineralization and resources, exploration results, mining and development, future plans and objectives of the Company and imprecision of mineral resources estimates, are forward-looking statements that involve various degrees of risk. Certain important risk factors could cause the Company's actual results to differ materially from those expressed or implied by such forward-looking statements including, without limitation, changes in the world wide price of mineral commodities and currency fluctuations, general market conditions, the uncertainty of future profitability and access to sufficient capital, risks inherent in mineral exploration, development, construction and mining operations, delays in obtaining or failures to obtain required governmental, environmental or other project approvals, environmental risks, access to labour and services and competition from other companies. As a consequence, actual results may differ materially from those anticipated in the forward-looking statements and caution should be exercised on placing undue reliance on forward looking information.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this press release.

CONTACT INFORMATION:
Allen J. Palmiere
President and CEO
(416) 363-2200 ext. 222
apalmiere@adrianaresources.com

or

Connie Dos Santos
Director, Investor Relations
(416) 363-2200 ext. 223
cdossantos@adrianaresources.com
www.adrianaresources.com
INDUSTRY: Manufacturing and Production - Mining and Metals

If you no longer want to receive announcements from us, please do not reply to this e-mail. Instead simply click here. .

© 2024 Canjex Publishing Ltd. All rights reserved.