Mr. Jean-Sebastien Lavallee of Canada Strategic reports
CANADA STRATEGIC METALS BEGINS A DRILLING CAMPAIGN OF A MINIMUM OF 2,000 METRES ON THE SAKAMI GOLD PROPERTY, TO DRILL THE EXTENSIONS OF THE LARGE GOLD ZONE INTERSECTED DURING THE LAST CAMPAIGN
Canada Strategic Metals Inc. and Matamec Explorations Inc. are preparing to mobilize for a drilling campaign of about 2,000 metres to test the extensions of the gold-bearing zone (zone 25). The table shows all the results obtained during the last two 2014 drilling campaigns on the Sakami project.
MINERALIZED INTERSECTIONS DRILLED ON SAKAMI PROPERTY SINCE 2014
Hole From To Length(i) Au
(m) (m) (m) (g/t)
PT-13-64 68.85 69.90 1.05 1.27
171.00 171.50 0.50 3.62
PT-13-65 112.50 138.00 25.50 3.03
Including 126.00 138.00 12.00 4.00
PT-13-66 109.95 125.40 15.45 1.18
PT-13-67 126.90 154.85 27.95 3.78
Including 132.25 154.85 22.60 4.01
Including 138.00 145.00 7.00 7.21
PT-13-68 200.50 221.00 20.50 2.77
Including 201.65 215.00 13.35 3.23
Including 201.65 205.00 3.35 4.71
278.25 281.10 2.85 2.82
294.00 297.00 3.00 1.70
PT-13-69 213.05 226.50 13.45 1.32
PT-13-70 78.75 99.00 20.25 1.27
Including 78.75 86.00 7.25 2.22
PT-13-71 49.10 51.65 2.55 2.06
102.00 121.50 19.50 2.97
Including 107.40 121.50 14.10 3.78
Including 112.00 121.50 9.50 3.95
PT-13-72 112.50 130.40 17.90 2.24
Including 112.50 119.00 6.50 3.65
PT-14-73 150.65 172.50 21.85 1.46
Including 160.50 172.50 12.00 2.16
PT-14-74 237.65 264.00 26.35 2.30
Including 243.70 252.50 8.80 3.80
Including 247.70 252.50 4.80 5.18
PT-14-75 274.05 281.20 7.15 2.40
PT-14-76 180.00 183.00 3.00 1.57
198.00 199.50 1.50 1.36
Pt-14-77 103.50 104.70 1.20 1.33
129.00 130.50 1.50 1.98
153.00 154.50 1.50 1.00
165.00 168.00 3.00 1.65
174.00 176.00 2.00 1.46
180.00 182.25 2.25 2.02
PT-14-78 193.50 195.00 1.50 1.37
208.50 213.00 4.50 2.15
PT-14-79 188.00 236.20 48.20 2.51
Including 188.00 200.00 12.00 6.93
Including 190.00 196.00 6.00 11.35
Including 202.50 207.00 4.50 1.33
Including 226.50 234.00 7.50 3.06
PT-14-80 157.50 163.50 6.00 1.03
179.00 181.75 2.75 2.08
187.50 190.50 3.00 2.32
201.00 202.00 1.00 1.28
203.00 204.00 1.00 3.11
PT-14-81 228.00 232.60 4.60 2.58
PT-14-82 231.45 271.70 40.25 1.43
Including 231.45 235.50 4.05 5.12
Including 231.45 240.00 8.55 3.58
Including 256.85 259.00 2.15 3.83
Including 267.50 271.70 4.20 2.38
PT-14-83 240.00 295.50 55.50 1.06
Including 240.00 252.00 12.00 3.54
(i) Core length; the company estimates the true width of the
mineralized zone at 80 to 95 per cent of the core length.
The 2014 drilling program was managed by Consul-Teck Exploration of Val d'Or, Que., which designed the drilling campaign, supervised the program, and logged and sampled the core.
Consul-Teck Exploration implemented quality assurance/quality control procedures to ensure best practices in core sampling and analysis. The drill core was logged and then split, with one-half sent for assay and the other retained in the core box as a witness sample. Duplicates, standards and blanks were inserted regularly into the sample stream.
The samples in secure tagged bags were delivered directly to the analytical facility for analysis. In this case, the analytical facility was the Bourlamaque Ltee. laboratory in Val d'Or, Que. The samples are weighed and identified prior to sample preparation. All samples are analyzed by fire assay with AA finish on a 30-gram sample (0.01 to 10 parts per million gold), with a gravimetric finish for assays over 10 ppm Au.
Jean-Sebastien Lavallee (OGQ No. 773), geologist, shareholder, president and chief executive officer of the company, qualified person under National Instrument 43-101, has reviewed and approved the technical content of this release.
© 2024 Canjex Publishing Ltd. All rights reserved.