10:05:29 EDT Tue 28 Sep 2021
Enter Symbol
or Name

Login ID:
Aris Gold Corp
Symbol ARIS
Shares Issued 137,832,940
Close 2021-03-08 C$ 2.15
Recent Sedar Documents

Aris Gold drills 78.1 m of 3.43 g/t Au at Marmato

2021-03-09 07:21 ET - News Release

Mr. Neil Woodyer reports


Aris Gold Corp. has released high-grade gold intercepts over broad widths at the Marmato mine in Colombia.

The 2020/2021 drill program that began in May, 2020, at Marmato comprises 60 holes totalling 35,000 metres and is now approximately 50 per cent complete. Drilling to date has demonstrated high-grade mineralization over broad widths, demonstrating potential to extend the 13-year mine life outlined in the company's prefeasibility study dated Sept. 18, 2020, with an effective date of March 17, 2020.

The principal objective of the drill campaign is to convert inferred mineral resources to indicated mineral resources. In addition to the Deep zone, the campaign is also testing the newly discovered Fortaleza zones A and B to the north, which opens up a new area that will require further drilling to evaluate its potential.

Aris Gold chief executive officer Neil Woodyer commented: "Our ongoing drill program at Marmato continues to deliver on our objective of adding to the already large gold inventory and 13-year mine life. Drilling in the Deep zone is demonstrating potential for a larger, higher-grade system than previously envisioned. In addition, drilling on the newly discovered Fortaleza zones to the north confirms a prospective new area worthy of additional testing."


The associated table lists new intercepts greater than 1.0 g/t gold received since the Caldas Gold news release of Nov. 24, 2020. Results reported here include six drill holes totalling 4,069 metres.

Hole               From        To   Intersection width       Au    True width
                    (m)       (m)                  (m)    (g/t)           (m)

MT-IU-075*       338.00    600.00               262.00     1.56         104.0
including        389.55    429.30                39.75     2.35          16.3
including        481.23    503.07                21.84     2.07           8.6
including        514.53    534.43                19.90     1.94           7.7
including        586.83    600.00                13.17     3.35           5.0
MT-IU-077*       215.00    250.65                35.65     2.82          21.0
and              333.20    409.75                76.55     1.93          44.9
including        333.20    364.60                31.40     1.95          18.4
including        377.50    388.40                10.90     3.61           6.4
including        397.90    409.75                11.85     2.93           6.9
and              521.00    532.80                11.80     4.16           6.8
MT-IU-078*       376.65    403.10                26.45     2.83           5.0
and              591.55    627.75                36.20     3.68           7.2
and              747.40    798.80                51.40     2.46          11.3
MT-IU-079*       409.60    462.00                52.40     1.67          22.7
and              572.80    591.70                18.90     2.37           8.1
MT-MH01-01**     327.60    340.82                13.22     2.89           5.2
and              385.40    746.85               361.45     2.21         147.1
including        431.00    509.10                78.10     3.43          30.8
including        667.00    746.85                79.85     3.07          35.4
MT-MH02-01**     173.90    189.20                15.30     2.16           9.8
and              421.00    462.10                41.10     2.57          29.6
and              573.70    746.50               172.80     1.95         130.4
including        573.70    619.20                45.50     2.33          34.0
including        643.50    738.20                94.70     2.13          71.9

* Denotes underground drill holes drilled at minus 50 to minus 73 degrees 
from the horizontal. The intersection widths do not represent true widths. 
The true widths estimated from the geological model are also given. Sample 
lengths average 1.60 metres but may be varied for geological and recovery 
factors. Intersections were calculated using a cut-off grade of 0.5 g/t 
gold, and no more than 5.0 m of continuous internal dilution for intervals 
up to 50 m, no more than 10 m of continuous internal dilution for intervals 
of 50 to 200 m, and no more than 20 m of continuous internal dilution for 
intervals greater than 201 m. Gold grades were capped at 13.0 g/t gold, 
which affects 14 samples of a total of 2014 samples. Intervals greater 
than or equal to 1.0 g/t are reported.
** Denotes directional drilling mother and kick-off holes. The directional 
drilling kick-off holes were drilled at minus 48 and minus 45 degrees from 
the horizontal. 


The continuing 2020/2021 drilling campaign has been successful in showing higher-grade mineralization over broad widths in the Main zone (MZ) below the 500-metre level and in the New zone (NZ) above the 500-metre level, which strengthens the probability of adding a significant amount of mineral resources to the current inventory. The higher-grade shell is defined as greater than 2.5 g/t Au and lies within the grade shell of 1.7 g/t Au used to build the geological model of the Deep zone (MDZ).

Infill drilling in the MZ has extended the higher-grade mineralization over broad widths down to the 400-metre level, well below the 500-metre level that is the bottom of the indicated mineral resource, and remains open at depth. Drill holes MT-IU-75 and MT-IU-078 confirm that the MZ is branching into three separate bodies (A, B and C) to the southeast with the three reporting higher-grade mineralization over broad widths. Drill hole MT-IU-075 intersected 39.75 m at 2.35 g/t Au in the Main zone A, 21.84 m at 2.07 g/t Au and 19.90 m at 1.94 g/t Au in the Main zone B, and 13.17 m at 3.35 g/t Au in the Main zone C. Drill hole MT-IU-078 intersected 26.45 m at 2.83 g/t Au in the Main zone A, 36.20 m at 3.68 g/t Au in the Main zone B and 51.40 m at 2.46 g/t Au in the Main zone C.

Two wildcat drill holes, MT-IU-077 and MT-IU-079, were successful in intersecting higher-grade zones over broader widths compared with previous drilling in the Fortaleza zones A and B, which opens a new area that requires further drilling to fully evaluate its potential. Drill hole MT-IU-077 intersected 35.65 m at 2.82 g/t Au and 76.65 m at 1.93 g/t Au in Fortaleza zones A and B, including two vein-related intercepts that returned 10.90 m at 3.61 g/t Au and 11.85 m at 2.93 g/t Au, respectively, in the Fortaleza zone B. Drill hole MT-IU-079 intersected 52.40 m at 1.67 g/t Au and 18.90 m at 2.37 g/t Au in Fortaleza zones A and B.

Infill drilling in the NZ confirms higher-grade mineralization over broad widths above the 500-metre level, which is the bottom of the indicated mineral resource. Kick-off drill hole MT-MH01-01 intersected 361.45 m at 2.21 g/t Au, including 78.10 m at 3.43 g/t Au in the NZ and 79.85 m at 3.07 g/t Au in the MZ. Kick-off drill hole MT-MH02-01 intersected 41.10 m at 2.57 g/t Au in the NZ and 172.80 m at 1.95 g/t Au in the MZ, including 45.50 m at 2.33 g/t Au and 94.70 m at 2.13 g/t Au.

The style of mineralization for the intersections associated with the NZ and the Fortaleza zone is the same as the MZ and is characterized by very narrow veinlets of quartz-pyrrhotite-bismuth telluride-free gold with minor amounts of pyrite and chalcopyrite, rimmed by a narrow halo of sodic-calcic alteration. The two high-grade intersections in MT-IU-077 in the Fortaleza zone are associated with thick quartz veins, which is a different style of mineralization that requires further investigation.

Most of the drill holes of this phase of drilling end within the low-grade shell with the result that the MZ is open on the southwest side. This is due to the location of underground drill stations above and close to the steeply plunging low-grade shell. However, the holes achieved their objective of fully cutting the high-grade MZ.

Qualified person

Stewart D. Redwood, BSc (honours), PhD, FIMMM, FGS, senior geologist providing consulting services to the company, is a qualified person as defined by National Instrument 43-101 -- Standards of Disclosure for Mineral Projects and prepared and where applicable, supervised the preparation of the scientific and technical information in this press release. Dr. Redwood verified the data disclosed in this news release, which included a review of the quality assurance and quality control samples and review of the applicable assay databases and assay certificates.

Sample preparation, analysis, quality assurance and quality control

Core samples were prepared by SGS Laboratories Ltd. in Medellin, Colombia, and assayed in its laboratory in El Callao, Lima, Peru (ISO (International Organization for Standardization) 9001:2008). SGS Laboratories is independent of the company. Gold was assayed by 30 g fire assay with atomic absorption spectrophotometer (AAS) finish and a detection range of 0.005 to 10 g/t. Samples over 10 g/t gold were reassayed by 30 g fire assay with gravimetric finish. Silver was assayed by aqua regia digestion and AAS finish with a detection range of 0.3 to 100 parts per million. Blank, standard and duplicate samples were routinely inserted for quality assurance and quality control. There are no known drilling, sampling, recovery or other factors that could materially affect the accuracy or reliability of the data referred to in this press release.

About Aris Gold Corp.

Aris Gold is a Canadian mining company listed on the TSX-V under the symbol ARIS. The company is led by an executive team with a demonstrated record of creating value through building globally relevant gold mining companies. Aris Gold operates the Marmato mine in Colombia, where a modernization and expansion program is under way, and the Juby project, an advanced-exploration-stage gold project in the Abitibi greenstone belt of Ontario, Canada. Aris Gold plans to pursue acquisition and other growth opportunities to unlock value creation from scale and diversification.

We seek Safe Harbor.

© 2021 Canjex Publishing Ltd. All rights reserved.