Mr. Greg Gibson reports
BONTERRA INTERSECTS 101.1 G/T AU OVER 3.9 M AT GLADIATOR AND 12.8 G/T AU OVER 5.6 M AT MOROY
Bonterra Resources Inc. has released drill results from the continuing exploration campaign at its 100-per-cent-owned Gladiator, Moroy and Barry projects. The objective of the current drilling campaign is to step out from known mineralization included in the company's recently released mineral resource estimate on the three projects.
The current drilling at Gladiator extends gold mineralization on both the Barbeau and North zones. Drill hole BA-19-40 intersected 101.1 grams per tonne gold over 3.9 metres
on the Barbeau zone, approximately 50 m down plunge of the known mineralization. Drill hole BA-19-37 intersected 8.1 g/t Au over 1.8 m
on the North zone, approximately 50 m down plunge of the known mineralization.
Continuing exploration at the Moroy project includes both underground and surface drilling. Drill hole MY-19-155 intersected 12.8 g/t Au over 5.6 m
and drill hole MY-19-158 intersected 12.2 g/t Au over 5.4 m. This drilling has extended the known mineralization by 150 m in the down-plunge direction. Surface drilling also succeeded to extend the mineralization by 150 m up plunge with hole MO-19-227 that intersected 3.6 g/t Au over 2.3 m. The Moroy deposit remains open at depth and along strike.
The current drilling campaign has extended known mineralization along strike and at depth on multiples zones. Hole MB-19-209 intersected 8.7 g/t Au over 1.5 m
and 6.1 g/t Au over 2.0 m
on zone H1, approximately 75 m deeper than known mineralization. In the same zone, hole MB-19-211 extended H1 zone at depth by 250 m with 6.3 g/t Au over 1.5 m. Hole MB-19-206 also extended mineralization by 200 m at depth with 5.9 g/t Au over 1.5 m.
Project Drill hole From To Length* Au
(m) (m) (m) (g/t)
Gladiator BA-19-37 440.0 441.8 1.8 8.1
BA-19-39 366.0 367.5 1.5 5.5
BA-19-40 570.1 574.0 3.9 101.1
Barry MB-19-206 283.5 285.4 1.9 3.1
MB-19-206 341.1 342.9 1.8 3.5
MB-19-206 592.9 594.4 1.5 5.9
MB-19-207 154.3 155.9 1.6 4.15
MB-19-209 118.7 120.2 1.5 8.7
MB-19-209 137.8 139.8 2.0 6.1
MB-19-209 206.7 210.9 4.2 5.1
MB-19-211 453.7 455.2 1.5 6.3
Moroy MO-19-227 306.5 308.8 2.3 3.6
MY-19-155 256.3 261.9 5.6 12.8
MY-19-158 70.5 75.9 5.4 12.2
* Stated lengths are core width as drilled,
true widths vary and average between 60 and 80
per cent of drilled widths. Core axis angles of
the intersection contacts and surrounding rock
units average 55 to 70 degrees.
Greg Gibson, chairman and interim chief executive officer, commented: "These recent encouraging drill results bode well for the expansion of the current resource. The company now has five drill rigs working on the current exploration drilling program on its three projects with multiple targets currently being tested to expand the gold mineralization footprint."
Quality control and reporting protocols
The company uses a rigorous quality assurance/quality control analytical program according to industry standards. The analytical results were done by pyroanalysis (AA) at the mine laboratory. Blanks, duplicates and certified reference standards are inserted into the sample stream to monitor laboratory performance. The company's quality assurance/quality control analytical verification program requires that a minimum of 10 per cent of the samples be audited at an independent laboratory. These audit assays were sent to ALS laboratory located in Val d'Or, Que. The results of the audits are consistent with those obtained.
Pascal Hamelin, PEng, vice-president of operations, is the qualified person under National Instrument 43-101, responsible for reviewing and approving the technical information contained in this news release.
We seek Safe Harbor.
© 2020 Canjex Publishing Ltd. All rights reserved.